Used Duplex NC Rotary Cut-off, helical-knife, servo-control, for
Corrugated Cardboard Production Line
Used NC Double-layer Helical-knife Rotary Cut-off
Technical Parameters:
1) Uses the independent oil pump and the filter coordinates two
groups of copper tubes to distribute in various gears position for
the oil, the lubrication and cooling.
2) Helical knife structure, type saw tooth knife, decrease cutting
obstruction, low noise.
3) Balance treatment: high quality alloy steel, for blade shaft,
which helps to keep it good stability.
4) Sun-shape wheels press cardboard in the front and the rear
conveyer. The transporting is stable and with even pressure, which
avoid jam caused or broken cardboard.
5) This type of Cut-off just consume the one of third energy
compare with the common cutter with its especial structure,
economize above 70% energy to get more money.
6) Exact and adjustable on gap gear assure knife-edge joggle
exactly. Running balanceable.
7) Computer system to keep order. Man-machine conversation system
NC. Automatic adjust cutting speed by cardboard specification and
matching.
8) The screen displays various production messages. Can consult,
modification, super addition and cancel order during running
machine.
9) Double layer cut corrugated cardboard to sheets at different
length at same time.
10) Tow layer independent control and driving system, combined in
one machine, to save space.
Technical Parameters:
| Max Effective Width | 1100~2500mm |
| Cutting Length | 500~9999mm |
| Cutting Precision | ±1.0mm |
| Design Speed | 100~250m/min |
| Working Speed | 80~220m/min |
| Remarks | Need Double-layer Stacker to fit Duplex Cut-off machine
|
Used Double-layer NC Conveyor Stacker, to fit duplex cut-off, for
Corrugated Cardboard Production Line
Used Double-layer NC Conveyor Stacker
Technical Parameters:
1) Automatic sheet stacking and side delivery.
2) Simplex or duplex down stacker structure.
3) Hydraulic servo valve control of elevator deck, ensure stable
and quickly stacking.
4) Conveyor belt keeping synchronous with production line speed,
keep stacking stable.
5) PLC control system to follow production line speed , delivery
paper sheet, control elevator deck up and down, control back stop
positioning clapboard to achieved automatic order change.
6) Adopt fiberglass brush press paperboard, and according to
paperboard length adjust pressure. Exit of paper sheet delivery
with press brush, anti-excursion and guide paper sheet correct
delivery.
7) Subsection independent driver by AC frequency conversion motor,
automatic follow production speed of production line, ensure stable
and quickly stacking.
8) This machine can be connect with production management system to
achieved order change and order management.
9) Adopt man-machine conversation and touch screen display, easy
operation.
10) Automatic clapboard setting for sheet length, and automatic
paper sheet side delivery.
11) Double-layer Stacker to work with NC Duplex Cut-off Machine.
Technical Parameters:
| Max Effective Width | 1100~2500mm |
| Max Stacking Length | 3000mm |
| Max Stacking Height | 300mm |
| Design Speed | 100~250m/min |
| Working Speed | 80~220m/min |
| Remarks | Double-layer Stacker to fit NC Duplex Cut-off machine |
used Corrugator Line, 3/5/7-layer, various flute type,
low-medium-high speed
